Steel fiber has not been around for a long time, but its application fields are becoming more and more extensive. Correspondingly, the types of steel fibers are also increasing.
1. According to the shape, there are:
Straight steel fiber (a), pressed prismatic steel fiber (b), corrugated steel fiber (c), hook-shaped steel fiber (d\e), big-end steel fiber (f), double-pointed steel fiber ( g), bundled steel fibers (h), etc.
2. According to the shape of the section, there are:
Circle (a), Rectangle (b), Groove (c), Irregularity (d)
3. According to the production process, there are:
Cut off steel fibers (cut with thin steel wires);
Shearing steel fibers (cutting with thin steel plates, strip steel);
Milled steel fibers (cut with thick steel plates or ingots);
Melt and draw steel fibers (drawn from molten steel).
4. According to the raw materials, there are:
Plain carbon steel fiber (tensile strength is generally 300~2500MPa);
Stainless steel fibers (304, 310, 330, 430, 446, etc. according to raw materials);
Other metal fibers (aluminum, copper, titanium and alloy fibers).
5. According to the surface coating status, there are:
No coating layer, epoxy resin coating, galvanizing, etc. A lot of the industry uses general steel fibers without a coating layer.
6. Classified by construction technology:
For spraying and pouring.
7. Classified by diameter scale:
General steel fiber (diameter d>0.08mm);
Ultra-fine steel fiber (diameter d≤0.08mm);
Ultra-fine steel fibers are primarily used for reinforced plastics and asbestos conflict materials.







