This processing method is relatively simple. Generally, cold-drawn steel wires with a small diameter of 0.4-0.8 mm are used as raw materials, and the steel wires are cut into short fibers according to the specified length. The tensile strength of steel fibers produced by this method is much higher than that of steel fibers processed by other methods, up to 1000-2000MPa.
The processing methods can be cutters and punches. Due to the high price of cold drawn steel wire, the cost of steel fiber produced by this method is higher. Another disadvantage of producing steel fibers by this method is that the surface is relatively smooth and the bonding strength with the substrate such as concrete is small. In order to increase the bonding strength between steel fibers and concrete and other substrates, it is often used to change the shape of the steel fibers, that is, to solve the problem by producing special-shaped steel fibers. There are three common methods:
(1) Edge pressing method: Before cutting the steel wire, use the pinch roller to feed the steel wire to press out the prismatic pit on the steel wire.
(2) Waveform method: Before cutting the steel wire, use the pinch roller to feed the steel wire to press the steel wire into a wave shape and then cut it.
(3) Hook method: Before cutting the steel wire, use the pinch roller to feed the steel wire to press out the hook shape at equal distances and then cut it.
The thin plate shearing method is a method of cutting cold-rolled thin steel plates into steel fibers. Before cutting, a special small slitting machine is used to cut the thin cold-rolled coils into strip steel coils. The width of the strip steel coil is the same as the length of the steel fiber. , and then continuously send the strip coil to the rotary cutter or ordinary punching machine for cutting, and the axis of the rotary cutter is perpendicular to the feeding direction of the sheet. The raw materials are generally annealed cold-rolled steel sheets, but unannealed cold-rolled steel sheets can also be used to improve strength.








