Hebei Haoaixi Steel Fiber Co., Ltd.
+86-15633600939
Contact Us
  • Phone: +86-15633600939
  • Wechat/WhatsApp: +86-13832557122
  • Email:jun@steelfiberconcretes.com
  • Add: Yangjiatao Industrial Park, Yutian County, Tangshan City, Hebei Province, China

What Is Steel Fiber?

Jan 05, 2022

The length-diameter ratio (the ratio of the fiber length to its diameter, when the fiber cross-section is non-circular, the diameter of the equivalent cross-sectional circular area is selected) 30 to 100 fibers.

Due to the different preparation methods, the functions of steel fibers are very different, such as the tensile strength of cold-drawn steel wire is 380-3000MPa, the tensile strength of cold-rolled strip shearing method is 600-900MPa, and the ingot milling method is 700MPa; molten steel condensation Although the method is 380MPa, it is suitable for producing heat-resistant fibers.

Thin steel wires with a certain length and diameter added to reinforce mortar or concrete. Commonly used long straight steel fibers with circular cross-sections have a length of 10-60 mm, a diameter of 0.2-0.6 mm, and an aspect ratio of 30-100. In order to add the interface bonding between fibers and mortar or concrete, various special-shaped steel fibers can be selected, and their cross-sections are rectangular, zigzag, and meniscus; The ends are enlarged or hooked, etc. When using cross-section non-circular

formula

When the steel fiber is in shape, its equivalent diameter (de) can be calculated as follows:

where a is the actual cross-sectional area of the steel fiber.

In order to disperse the steel fibers evenly in the mortar or concrete, the aspect ratio of the fibers can be used to form a bundle of steel fibers bonded together by a water-soluble glue. Steel fibers can be made by cold-drawn steel wire cutting, thin steel plate shearing, steel block or ingot milling, and melting steel drawing. Low carbon steel fibers can be used to manufacture steel fiber reinforced concrete used at room temperature; stainless steel fibers must be used to manufacture refractory steel fiber reinforced concrete. Adding an appropriate amount of steel fiber to mortar or concrete can improve its tensile and flexural strength, and greatly improve its resistance and impact strength.