Hebei Haoaixi Steel Fiber Co., Ltd.
+86-15633600939
Contact Us
  • Phone: +86-15633600939
  • Wechat/WhatsApp: +86-13832557122
  • Email:jun@steelfiberconcretes.com
  • Add: Yangjiatao Industrial Park, Yutian County, Tangshan City, Hebei Province, China

Bonding Of Steel Fibers

Dec 05, 2021

Since the interface bond between the steel fiber and the concrete matrix is mainly physical, that is, the transmission of frictional shear force is the main factor, so for the steel fiber itself, the bonding performance should be improved from the two aspects of fiber surface and fiber shape. . There are the following four specific methods.

1. The surface of the steel fiber is roughened and the cross-section is irregular. This goal can be achieved by using the melting and extraction method. When the steel fiber is rapidly cooled in the air, the surface shrinks unevenly and becomes rough, and the cross section also shrinks into a crescent shape, increasing the contact area with the substrate. Milled steel fibers have a smooth surface on one side and a rough surface on the other, which also increases the contact area with the concrete

⒉ plastically process the fibers at a certain distance along the axis of the steel fiber. For example, the "Xinke" steel fiber of Japan's Kobe Steel Corporation's "XOREX" steel fiber of Leibang Corporation of the United States (Figure 2-1, c) and the "S-2" and "S--3" steel fibers of Qing'an Iron and Steel Plant steel fiber. Since the surface is pressed into a prismatic shape, or pressed into a wave shape, the mechanical bonding force is increased.

3. Shape the ends of the steel fiber. Such as ingot milling steel fibers with anchoring platforms at both ends; American Becker Gongdian "DRAM IX" steel fibers (Figure 2-1, e) and Qing'an Iron and Steel Plant "S-4' and as-so steel fibers,. They are made of hooks at both ends; there are also large-head-shaped steel fibers extracted by melting and extraction. Due to the anchoring effect at both ends, the pull-out resistance is improved.

⒋ Coat the surface of steel fiber with epoxy resin and surface micro-rust treatment. This method does not improve the interfacial bond strength as much as the previous methods, but it also has certain effects.

034


Previous: The Main Properties Of Steel Fibers
Next: No Information