Hebei Haoaixi Steel Fiber Co., Ltd.
+86-15633600939
Contact Us
  • Phone: +86-15633600939
  • Wechat/WhatsApp: +86-13832557122
  • Email:jun@steelfiberconcretes.com
  • Add: Yangjiatao Industrial Park, Yutian County, Tangshan City, Hebei Province, China

The main properties of steel fibers

Feb 25, 2022

Steel fiber is a new, high-performance steel fiber variety. The mixing ratio design method of steel fiber road is basically the same as that of ordinary concrete, but the differences are: double-controlled strength standards (compressive strength and flexural tensile strength); steel fiber content is determined according to the flexural and tensile strength required by the design; unit water consumption and sand The rate is related to the amount of fiber, and every 0.5% (volume rate) steel fiber is added, and the unit is water

The amount increased by 6kg, and the sand rate increased by 2%. Steel fiber reinforced concrete has the same mixing, operation and construction performance as ordinary concrete. The fibers will not form balls in the concrete and are evenly distributed. It can be produced in commercial concrete mixing plants and can be used for pumping construction. The early slump loss of milled steel fiber reinforced concrete is larger, with a loss of 32% in 30 minutes and a loss of 42% in 2 hours. The actual workability of steel fiber reinforced concrete is better than the same

004_

Slump of ordinary concrete. Compared with ordinary concrete, steel fiber reinforced concrete has good material properties. Compared with ordinary concrete, its compressive strength is increased by 2-20%; flexural tensile strength is increased by 20-50%; splitting tensile strength is increased by 20-40%; wear resistance is increased by 40% %, its physical and mechanical properties can fully meet the technical indicators of urban road engineering and inspection manhole covers and other supporting components. steel fiber

The rough and clean surface can be firmly combined with the cement paste in the concrete, which is the fundamental reason for milling steel fibers to improve various properties of concrete.

In addition, high-strength steel brazing concrete has been widely used in railway sleeper prefabrication, highway expansion joints, cement concrete pavement and other prefabrication, cast-in-place, production and construction, etc. Its excellent performance can completely achieve good technical, economic and social environment. benefit. Due to the different preparation methods, the properties of steel fibers are very different, such as the tensile strength of cold-drawn steel wire is 380-3000MPa, the tensile strength of cold-rolled strip shearing method is 600-900MPa, and the ingot milling method is 700MPa; molten steel condensation Although the method is 380MPa, it is suitable for the production of heat-resistant fibers.