Hebei Haoaixi Steel Fiber Co., Ltd.
+86-15633600939
Contact Us
  • Phone: +86-15633600939
  • Wechat/WhatsApp: +86-13832557122
  • Email:jun@steelfiberconcretes.com
  • Add: Yangjiatao Industrial Park, Yutian County, Tangshan City, Hebei Province, China

Product introduction and characteristics of rows of steel fibers

Feb 10, 2022

The end-hook row-shaped steel fibers are made of low-carbon and high-strength cold-drawn steel wires. After more than ten cold-drawing processes, without any heat treatment in the middle, they are directly drawn into steel wires with a diameter of 0.5-1.0mm. High tensile strength of steel wire. Imported water-soluble glue is used to bond single steel wire end hook-shaped steel fibers into rows to ensure that the fibers do not agglomerate and disperse evenly during concrete mixing. This type of product is a high-performance steel fiber because of its high tensile strength, good toughness and low price.

Length: 30-65mm

Diameter: 0.55-0.9mm

Tensile strength: 600-1000MPa

The technical characteristics of the sticky end hook steel fiber:

1. It is a variable cross-section fiber, and both ends have raised marks with increased cross-section;

2. The steel fiber of the wire end hook slips in the concrete member, and the shape of the convex marks at both ends will not be deformed, which has a strong anchoring effect;

3. The effect of strengthening and toughening is remarkable. Especially the resistance, the load-disturbance curve decreases slowly, and the concrete properties are closer to the ideal elastic-plastic body;

4. The steel fiber reinforced concrete structure with steel wire end hooks should ensure that the damage is resistant damage instead of brittle damage when it is broken, and it is necessary to ensure that the steel wire end hook steel fibers in the two ends of the anchored concrete crack are pulled out instead of being pulled off when damaged. Also, the tensile strength of the steel fiber itself must be greater than its pull-out stress.

The end-hook type steel fiber can ensure that the fiber does not agglomerate and disperse evenly during concrete mixing, improve the impact resistance of concrete, and improve the impermeability of concrete because of its high tensile strength, good toughness, and low price. , Compared with other shapes of steel fiber, its tensile, compressive, and flexural strengths have been greatly improved, and it is suitable for key earthquake-resistant and anti-riot structural projects. At present, it has been widely used in roads, highway slope protection bridges, tunnels, airports, ports, railway sleepers, etc.