There are two methods of mixing steel fibers, manual mixing and machine mixing. For some small projects, such as some small projects such as repairing walls, gaps and holes in the ground, we can use the method of mixing steel fiber concrete with hand-steel fiber technology, because the concrete used in these places is not too much, So you can use this method, just pay attention to adding water properly, you can mix the steel fiber well and evenly.
As for machine mixing, it is naturally used in medium and large-scale projects. Usually, sand and work materials are added to the mixing bucket in a certain proportion, and steel fibers are added to an appropriate amount of steel fibers, and then dry mixing is carried out for a period of time, usually 1 to 2 minutes. Then add water for mixing, and then pavement after mixing is completed.
On the transmission belt, the dry sand and stone are usually put into the hopper first, and are put into the steel fiber concrete mixing barrel in proportion.
Steel fiber is added to the dry material with an appropriate amount of steel fiber (according to design requirements, refer to the use of steel fiber reinforced concrete to increase the number of steel fibers). When the sand, stone and steel fiber are poured into the hopper, the steel fiber reinforced concrete can be dry mixed (note: do not add water), and it can be mixed for 1-2 minutes. The purpose of the steel fiber reinforced concrete cooperation ratio planning is to reasonably cooperate with the constituent materials, that is, steel fiber, cement, water, thick and fine aggregate steel fiber material and admixtures, so that the prepared steel fiber reinforced concrete can meet the construction and engineering application requirements to the greatest extent.




